2024 Acura Integra Steering Problems

I purchased this car 2 weeks ago and noticed when I drive over 45 mph the steering wheel kind of freezes up and shakes. A warning sign pops up that say steering required and has a symbol of a steering wheel with hands on each side of it. This lasts for about 10 seconds or so, then goes away. Feels really scary like I could get into an accident. This is the first place I have reported the problem to.

This is an ongoing issue regarding this vehicle's steering where it can become very hard to turn the steering wheel when going highway speeds. I tried calling a dealer and corporate, and they both told me that parts are not available and I have to wait.

The steering on this vehicle began feeling sticky intermittently, not every trip starting 7/31/2024. Since then it has become more and more of an issue. The sticky steering is most noticeable on the interstate when trying to recenter the steering wheel after going around a curve. More so when straightening from a left turn. I had researched, just after leasing the vehicle, and saw this was an issue on 2023 models. Nothing has happened until about 10,000 miles on my odometer. It has become prevalent during every trip taken now, including on secondary roads at lower rates of speed. A service appointment was scheduled with my dealer, a couple of days prior to the recall. I was advised to bring it in, as the recall had not been announced at that time. When I took it in on 10/15/2024, the dealer shared there was nothing they could do at this point, didn’t even inspect it or look at it, as it is too early in the recall and they had not been told how to fix it. They also shared it could be months before something could be done. I am writing to document this issue, should there be an incident, and share that it is a little unnerving to drive a vehicle that could potentially cause an accident and have a dealership say there is nothing they can do and that I should continue driving the vehicle… No lights, warnings, etc have come on in association with this issue.

Sticky steering, when trying to make small adjustments the steering wheel feels locked and takes more of a rotation to get it “unstuck”. This causes me to look like I’m swerving almost just trying to make a small adjustment to the steering wheel.

The steering wheel locks momentarily at cruising speed of 35-45 MPH. This results in the need of over or under compensating the steering with extra effort. The steering is generally locked in the same position and it also frequently moves the direction of the vehicle to the point that I fear this is a severe safety issue.

After driving on longer drives the steering becomes "sticky" off center. Looses its smoothness of operation. Usually does not occur on shorter drives, but, the longer you drive the more prevalent the problem becomes. This is my wife's car and I had not driven it for a while, as I was driving it the problem manifested itself. As soon as I said something to my wife, she said she had noticed it as well. Upon a suggestion from a auto tech friend I turned off all the electronic nannies, but, the problem is still there.

The contact owns a 2024 Acura Integra. The contact stated that while driving at various speeds, the steering wheel seized and became difficult to turn in either direction. The cause of the failure was not yet determined. The local dealer was notified of the failure. The manufacturer was not yet contacted. The failure mileage was 3,500.

My car only has 3725 miles. In some occasions, after a while of driving at highway speeds, steering requires a noticeable increase in the amount of force needed to turn the wheel for small corrections or turning. It feels like the wheel is stuck. After turning the wheel a couple of times, like when you take an exit to get off the highway, the steering wheel starts behaving normally and smoothness returns.

Steering doesn’t want to turn occasionally and additional effort is required to turn the steering wheel, followed by sudden minimal effort. Had this issue since beginning. I thought lkas was correcting the car to go straight. But that is not the case

What component or system failed or malfunctioned, and is it available for inspection upon request? STEERING. MOMENTARY INCREASE IN STEERING EFFORT FREQUENTLY OCCURS AT HIGHWAY SPEEDS. How was your safety or the safety of others put at risk? RISK OF LOSS OF CONTROL. Has the problem been reproduced or confirmed by a dealer or independent service center? YES, DEALER CONFIRMED ON 3/8/2024. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? ISSUE WAS REPRODUCED AND ACKNOWLEDGED BY THE DEALER BUT THE ACTUAL STEERING WAS NOT INSPECTED TO MY KNOWLEDGE. THEY INDICATE THAT ACURA IS AWARE OF THE ISSUE BUT HAS NOT ISSUED ANY DIRECTION EVEN THOUGH THE WELL KNOWN FIX IS REPLACEMENT OF THE STEERING RACK. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? NO

The steering wheel sticks and/or takes more effort to turn when traveling >30MPH. The steering wheel does not return to center on its own at these speeds. When the steering wheel sticks during a turn (as if it were in a notch) it takes more effort to get the wheel out of the notch and I have over corrected in a turn multiple times because of the extra force needed to turn the wheel. Symptoms started around 3500 miles, 3 months into ownership. Issue is inconsistent, not easily replicated except under precise driving conditions. at speeds <30 MPH, the issue is rarely present.

car has 5700 miles and intermittently experience the steering getting stuck in a position until i give it a little tug to break it free. Happens more frequently after taking a long wide turn and trying to straighten the wheel after.

My 2024 Acura Integra is exhibiting the sticky steering wheel event that the Honda Civics are experiencing (EA23003 and PE23005). When driving at highways speeds the wheel becomes "stuck" in one position. When you go to make a small correction there is added resistance and when the wheel does move it moves abruptly due to the extra force required. This causes the wheel to move farther than needed / expected causing the car to abruptly at highway speeds. I've turned off the LKAS system and switched between all of the different steering "modes" to try and correct this. Found out that this is an issue with the Civics and now prevalent in the Integra. Very unsafe. I've also experienced it some on a curvy road which was quite disturbing.

The steering wheel is quite sticky when I'm driving and causes some safety concern as the effort to turn my car at high speed is affected. Need a resolution on this one quickly as during tight turn and high speeds this is a big safety issue.

I've been having issues with the steering on my 2024 Acura Integra. It has roughly 8k miles on the odometer. There is an intermittent issue where it feels like my steering gets hung up/takes more effort to make a turn. When the issue recurs on certain drives, but doesn't occur at all on other drives. I've noticed the issue most frequently when traveling on the highway. The issue feels similar to fighting against the lane keeping system, but there are no warning lights and I'm not close to leaving my lane. I've had the issue occur when the lane-keep system is off and cruise control is off so I don't think it is occurring due to the safety systems. I see an open investigation into this issue and a technical service bulletin was released for the Honda Civic SI(same car mechanically). I've informed my Acura dealer, Pohanka Acura in Chantilly, VA. They brushed off the technical service bulletin because its from Honda, not Acura. They're essentially the same car...

Steering becomes “sticky” not centering in an unrestrained state resulting in excessive constant input required to center vehicle in otherwise straight line driving like it is contantly tracking off course and never in a neutral position. Problem persists even after a battery disconnect to reset electronics.

At under 3k miles I am experiencing something called “sticky steering.” The steering wheel will get stuck and I would need to use more force to turn the wheel. For example When making turns, the wheel should return back to its normal position when you let go of it. However, with the sticky steering issue, it does not and I would need to forcefully straighten out the wheel. This occurs at both low and high speeds and seems to be more prevalent in colder weather. A quick Google search seems to show a common issue with this generation Acura Integras and Honda Civics.

The steering component has a defect to where when you’re driving and go to slightly turn the steering wheel it feels as if it “gets stuck” and then just gives. It is a safety issue because it causing you to steer harder and then when it gives you are pulling the steering wheel with a little more pressure you almost over correct. Could cause a wreck. It was inspected by dealership and there was no code and “drives how vehicle was intended by manufacturer” they were unable to re create it. I’ve been driving the car since September and just started having this issue 3 weeks ago around 7k miles. I’ve read other integras especially 23’ has had this issue. They won’t replace it until there is a recall for it.

Vehicle steering can stick and cause a momentary increase in steering effort that could potentially cause over-correction and an increased risk of a crash

The contact owns a 2024 Acura Integra. The contact stated that while driving at various speeds, the steering wheel had to be overcorrected. There was an abnormal thumping noise detected. There were no warning lights illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the steering column needed to be replaced. The vehicle was not repaired due to parts being on backorder. The manufacturer was contacted and opened a case. The failure mileage was approximately 12,000. The VIN was not available.