2019 Ford Flex Body & Structure Problems

The recalled B Pillar has detached this weekend in the front of the left driver's side B pillar- it seems as it being held on by the keyless entry components. It is at approx 25 degree angle to the body of the car. As an added consequence of the redirected airflow- the driver's side door is very cold as air is getting in where it previously didn't. I scheduled with the AutoNation Amherst dealership for evaluation and repair. When I called back to move the appointment it was cancelled because I was told there is no fix/no parts. ???

The contact owns a 2019 Ford Flex. The contact stated that while attempting to reverse(R), the rear-view camera became inoperable. The contact stated that the rear-view camera failed intermittently, with the image appearing and disappearing, or being upside down. Occasionally, the rear-view camera displayed a blank screen. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts for the recall repairs were not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The approximate failure mileage was 94,000.

B-Pillar trim molding on passenger side fell off while going through car wash.

I brought my 2019 Ford Flex to World Ford Pensacola for two open safety recalls: 25SA9 (Rearview Camera) and 25SB8 (B-Pillar Trim). Despite the B-pillar trim being already detached (failed component), the dealer refused to document the inspection for recall 25SB8. Furthermore, on Invoice #XXX, they incorrectly documented recall 25SA9 as ‘Only for Mustang’, even though my vehicle is a Ford Flex. This dealer is providing false documentation and refusing to record safety-critical defects on the official OASIS report. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2019 Ford Flex. The contact stated that while attempting to reverse, the rear-view camera became inoperable. The rear-view camera image was distorted and upside down. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, parts to do the recall repairs were not yet available. The vehicle was taken to the dealer where it was diagnosed and determined that the camera system had failed and needed to be replaced. The dealer confirmed that parts were not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 117,000.

The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were not yet available. The contact stated that the rearview camera initially displayed an inverted image, but the camera had become inoperable while reversing. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was not made aware of the failure. The failure mileage was unknown.

The contact owns a 2019 Ford Flex. The contact stated that while the vehicle was parked, the contact noticed that the driver's side rear door exterior trim had detached and flown off the vehicle. The contact only noticed that the trim had detached after the vehicle was parked. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was unknown.

The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 25V732000 (Structure) and 25V695000 (BACK OVER PREVENTION); however, the parts to do the recall repairs were not yet available. The contact stated that while driving at 55 MPH, the driver's side B-pillar trim detached from the vehicle. The B-pillar trim struck the side of the vehicle and cracked. The contact stated that a part had fallen off the vehicle, and the other part was attached to wires. The local dealer was not contacted. The part attached to the wires was glued. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 145,000.

The contact owns a 2019 Ford Flex. The contact stated that while driving on several occasions, the B-pillar trims detached, causing electrical damage to exposed wiring. The contact received notification of NHTSA Campaign Number: 25V732000 (STRUCTURE); however, the part to do the recall repair was not yet available. The dealer was notified of the failure, but the vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 72,823.

While driving at highway speeds the Side B pillar panel became unattached and broke off.

The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the windshield trim was detaching, causing water to leak into the vehicle on the driver's side. While in reverse, the back over prevention camera displayed the image of the rear of the vehicle that was upside down, or there was no image displayed. The dealer was contacted, and it was confirmed that the parts were not available for the recall repairs. The manufacturer was not made aware of the issue. The failure mileage was approximately 50,000.

The contact owns a 2019 Ford Flex. The contact stated that while reversing, the rear-view camera display blacked out. The contact stated that the rear-view camera display operated properly occasionally. Additionally, the front passenger’s side B-pillar trim was loose, and there was an abnormal whistling sound coming from the B-pillar. The dealer was made aware of the failure; however, the contact was informed that parts were not yet available. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the unrepaired recall was a safety hazard. The contact stated that the vehicle was used to transport children. The contact received notifications of NHTSA Campaign Numbers: 25V695000 (Back Over Prevention) and 25V732000 (Structure); however, the parts for the recall repairs were not yet available. The manufacturer was not made aware of the failure. The failure mileage was unknown.

1) Trim piece that includes the keyless entry pad on driver's door, broke off while driving 80 mph on highway. The keyless entry pad was left hanging on by the electrical cords. It is available for inspection as it has not been fixed yet. 2) I didn't see where it went, but it had the potential to fly off and hit any cars behind me. 3) Car has been inspected by mechanic at Ford dealership and provided cost for part to fix. 4) Car has not been inspected by manufacturer, police, insurance rep, etc. 5)No warning lamps, messages or any symptoms prior to failure. I honestly thought something hit my car. I ended up pulling over to assess the situation. It was then that I noticed the panel broke off and the remaining piece was left hanging.

While driving down a highway at 70mph, the keypad on the driver's door detached from the body and was hanging by wires. We had to pull over. We couldn't get it back in so we put the window down and had to zip tie it to the door frame, leaving the window down for our entire long trip. We were afraid it was going to fly off and hit the car behind us, causing damage and a safety hazard. We took the car to Stevens Ford Jersey City and had it repaired. This is a cost we paid for. The only warming sign was a constant whistling sound we would hear.

On 6/4/2025, the driver side front door B-pillar trim piece separated from the vehicle. The tape that joins the trim piece to the door sheet metal completely sheared. The adhesive is still fine but the form separated. The part is connected only to the door through the wire hardness of the keyless entry. TSB 20-2427 stated the issue is "loose". But the actual issue is a flying part with a connecting string.

B Pillar trim on drive-side door has fallen off multiple times when driving at speeds i’d say about 50mph. Have been lucky not to have lost it as it was barely held on by the keyless entry cord.

The black glossy plastic applique on the Driver's Door Window Frame (also containing the Keyless Entry Keypad) blew off on the Expressway at approximately 70 MPH. While the wire harness retained the lower portion of the applique, the applique cracked from the force of the separation, for which the bottom third of the applique hung from the harness whereby the upper two-thirds of the applique became a projectile and flew onto the expressway. After sharing this with a friend (also owning a 2019 Ford Flex), he said his came off last year. Upon further studying this matter, it appears that in Ford's wisdom they only used small strips of double-sided tape to retain this; for which there are many reports of this same failure mode: [XXX] In their infinite wisdom, Ford now only sell the Applique Panel with the Keypad (Ford Part Number BA8Z7420555AC ), rendering it at a MSRP of $228.83 just for the replacement part. The Ford Parts Counter Person said they sell a lot of these, due to the poor design and retention. As this is a hazard to others on the road (e.g. potentially becoming a projectile) Ford should be forced to Recall this defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

B pillar trim was lost going down the road. May of 2025 unsure of date.

The passenger side b pillar trim flew off on the highway! The driver side is also loose

The contact owns a 2019 Ford Flex. The contact stated that while driving at an undisclosed speed, the front passenger's side B-pillar trim detached. The vehicle was taken to the dealer, where it was diagnosed with a detached front passenger's side B-pillar trim. The contact was advised that the front passenger's side B-pillar trim needed to be replaced. The vehicle was repaired. The contact stated that later, while driving at an undisclosed speed, the front driver's side B-pillar trim detached and flew off the vehicle. The vehicle was taken to the dealer, where it was diagnosed with a detached front driver's side B-pillar trim that needed to be replaced. The contact was informed that parts were not yet available. In addition, the contact was informed that the parts could be ordered from a secondary vendor. The contact was advised to hold off on ordering the parts because there was an open recall on the vehicle. The vehicle was not repaired. The contact received notification of NHTSA Campaign Number: 25V732000 (Structure); however, the part to do the recall repair was not yet available. The manufacturer was not made aware of the failure. The failure mileage was approximately 74,561.