2018 Mercedes-Benz E-Class Powertrain & Transmission Problems

The car did not give any warning before this issue came about. A matter of fact when I took it to the mechanic they were unable to do a diagnostic test because there were no error messages and check engine light never came on. After taking it to the dealership they were able to check the history and saw that the error code P061b00 shows that the clutch position switch module needs to be replaced. While driving in traffic the car went into N (neutral) and wouldn’t not go back in D (drive). It took several minutes of me trying to change gears but it eventually went into P (park). The vehicle is unable to change gears sometimes and this is unsettling because the safety of myself, my children and others is affected if I’m driving and the car goes into neutral all of a sudden with no warning or goes into park and is unable to move. This occurred several times within a two week span while my children were in the car and this could have ended very differently. I took it to a certified mechanic who provided an explanation based on the error code received and stated that this was a huge safety issues that needed to be addressed.

Vehicle went into limp mode at 83,000 miles and it was due to the electronic valve body failing within the transmission. Dealership mentioned it shouldn’t happen in a vehicles lifetime, this includes maintenance at the right interval (60,000 miles), which mine was. I was quoted roughly $3,800 by the dealership but after speaking with corporate it was brought down to $2,600.

The contact owns a 2018 Mercedes-Benz E300. The contact stated while attempting to shift into drive, the transmission independently shifted to neutral. The contact attempted several times to shift into drive however, the transmission failure persisted. The vehicle was towed to the local dealer. The vehicle was diagnosed with transmission failure. The vehicle was not repaired. The manufacturer was notified on the failure. The approximate failure mileage was 154,000.

Mercedes Benz use low quality PCV regulator valve , it is a common failure problem, warranty will not be covered, Benz sells part replacement for around 350 USD and it require about 2000 in labor to be fixed on average

For several years, the vehicle has had issues when shifting from drive to reverse or reverse to drive. I took to the dealer for repair and they claimed it was fixed. Because it is an intermittent issue, it was difficult to pinpoint when and if the issue would happen again. The vehicle is available for inspection and has been taken back to the dealer. On several occasions, since the car would not shift from drive to reverse or reverse to drive, I would have to turn off the vehicle and restart to reset. In some instances, I did not notice the car had not shifted and only after I accelerated and headed in the opposite direction. Car is at the dealer and requires a shifter module due to a steering column module error. Mercedes Benz of USA has been difficult to manage and the dealer has apparently made attempts to fix the car. That being said, I doubt that this is an isolated incident, as the E class was previously recalled for the same issue, but not this vehicle year. Power train: Automatic transmission: Control module (tcm, pcm) Recall date 2017-02-07 Recall no. 17V078000 Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017 E300 and E300 4Matic vehicles. The affected vehicles may have a damaged steering column-mounted shift lever module. If the internal circuit board is damaged, moving the shift lever will not select a transmission gear. Recall consequence If the vehicle does not move forward or backward as selected by the driver with the shift lever, there is an increased risk of a crash. Recall action MBUSA will notify owners, and dealers will replace the steering column-mounted shift lever module, free of charge. The recall began April 2017. Owners may contact MBUSA customer service at 1-800-367-6372.