2016 Chrysler Town & Country Powertrain & Transmission Problems

The contact owns a 2016 Chrysler Town and Country. The contact stated that while driving and while the vehicle was parked, the vehicle unexpectedly slipped out of gear with the check engine warning light illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed that the transmission had failed and needed to be repaired. The vehicle was not repaired. The vehicle was taken to the dealer, where it was diagnosed, and it was determined that the transmission had failed and needed to be repaired or replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for further assistance. The approximate failure mileage was 120,000.

Transmission pump failure leading to sudden power loss. This is a known problem with 2015-16 Chrysler Town & Country's and there is a recall out for it (Chrysler:S44, NHTSA: 16V461000). However my VIN does not appear in the recall registry, despite being manufactured right in the middle of the specified manufacturing time span for the defect. Because of this I was never sent any information on the recall as the company doesn't think my vehicle was affected. I disagree and think their database is incorrect. My vehicle manufacture date is Nov 15, and the recall span for my model of vehicle is Jul 15-Apr 16. I would like someone to verify and explain to me why my vehicle, which has this problem, isn't included in the recall.

After the Chrysler dealer in Glendale CA completed Recall S44 – Transmission Oil Pump on my 2016 Chrysler Town & Country in October 3 2025, the transmission began to malfunction and eventually stopped shifting completely. The dealer drained the transmission fluid, removed both front axles, removed all transmission components, and replaced the transmission oil pump, seals, bolts, and torque converter as required by the recall. The transmission is available for inspection upon request. Safety Risk: The vehicle became unsafe to drive when the transmission began shifting erratically and then failed to shift at all, causing sudden loss of acceleration in traffic and posing a risk to myself and others. Diagnostic Codes: Before the recall, the vehicle had code P06DE (Engine Oil Pressure Control). Chrysler has a documented TSB for P06DE requiring a PCM software update, but the dealer did not perform this update during the recall. After the recall, the vehicle developed new code P0760 (Shift Solenoid C Malfunction), which was not present prior to the recall and appeared only after the transmission was reassembled. Inspection and Confirmation: The dealer confirmed P0760 but refused further inspection or repair, stating it was “not related,” despite the failure occurring immediately after major recall-related transmission work. The vehicle has not been inspected by the manufacturer. The failure is reproducible: the transmission will not shift. Reason for Complaint: This failure happened shortly after the S44 recall, which involved complete transmission disassembly. The combination of new post-recall transmission codes, the absence of a required PCM software update, and the sudden unsafe failure raises concern that the recall work may not have been performed correctly. I request NHTSA review whether Recall S44 repairs are causing secondary failures or being improperly completed

The contact owns a 2016 Chrysler Town and Country. The contact stated while driving at an undisclosed speed in traffic, the vehicle stalled. The contact shifted to neutral(N) and was able to drive to the intended destination. The contact stated that while driving and attempting to stop the vehicle, the vehicle required to be shifted to neutral(N) repeatedly. In addition, the contact stated that on another occasion, the vehicle independently accelerated, prompting the contact to immediately depress the brake pedal to stop the vehicle. The contact stated that the failure had occurred several times. In addition, the check engine warning light later illuminated. The contact used a fuel treatment to clean the fuel; however, the failure recurred. The vehicle was taken to an independent mechanic, where it was diagnosed with thermostat and transmission failure. The contact was provided DTC: P0128 with DTC Severity of 2 of 3. The contact was informed that the thermostat and transmission needed to be replaced. The contact stated that only the thermostat was being replaced. The dealer was made aware of the failure and informed the contact that the VIN was not associated with any recall. The contact referenced an unknown recall with a similar failure description, but the VIN was not associated with the recall. The manufacturer was made aware of the failure. The failure mileage was approximately 133,000.

Van was driving fine, no issues. Regular maintenance done, and 100,000 mile work completed within last year. One day it was totally fine, the next day it was whining, hopping and driving unsafely. Transmission randomly needs replaced. Throwing codes for low pressure and the pump losing prime. All codes were transmission lost of pressure related and the transmission has an internal failure.

The contact owns a 2016 Chrysler Town and Country. The contact stated while driving 65 MPH, the vehicle decelerated and stalled. The vehicle was towed to an independent mechanic, and it was determined that the transmission pump had failed and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in NHTSA Campaign Number: 16V461000 (POWER TRAIN). The contact stated that the vehicle had experienced the failure listed in the recall. The local dealer was not contacted. The failure mileage was 103,000.

I was pulling up to a red stoplight to stop and the vehicle sputtered to a stop & the engine stalled and I tried to restart the vehicle & it immediately died 2 times. On the 2rd time starting the vehicle it stayed one, I had put on my hazard lights by this time as the light had already turned green and the 2 cars behind me had pulled around me to go through the intersection. Once my car started again, I pulled over to the turn lane & pulled into the gas station parking lot. The car stayed on and was ok until I was almost home. I had pulled up to stop at a stop sign & it reacted similarly; sputtered to a stop then just turned off. No check engine light on or anything. Thankfully ai was able to make it the couple.blocks away to my home.

The contact owns a 2016 Chrysler Town & Country. The contact stated that while driving at an undisclosed speed and attempting to accelerate, the RPM increased quickly but the vehicle lost motive power. The contact was able to pull over to the shoulder of the roadway, where the failure persisted, and the contact became aware that the vehicle failed to respond while in reverse. The check engine warning light was illuminated. The vehicle was towed to the dealer, who diagnosed a failure with the transmission pump. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 16V461000 (Power Train), but the VIN was not included. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 77,000.

I purchased a used 2016 Chrysler Town & Country in February 2017 at 33,000 miles. At 77,000 miles, the transmission failed and had to be replaced, just beyond the 65,000-mile warranty. The second transmission has now failed again just beyond 100,000 miles. In addition to the repeated transmission failures, this vehicle was manufactured without a transmission dipstick, which Chrysler made proprietary. Multiple mechanics confirmed that checking or maintaining transmission fluid requires special tools or dealer-only service, making regular maintenance nearly impossible for owners. This design flaw contributes to premature failure of the transmission and creates a safety and reliability risk. Chrysler must be held accountable for releasing a vehicle with limited serviceability and repeat major component failures. I am requesting the NHTSA investigate this issue for safety, design defect, and potential recall.

The contact owns a 2016 Chrysler Town and Country. The contact stated while driving at 30 MPH and depressing the accelerator pedal, the vehicle failed to respond as intended. The contact stated that a dealer was contacted, and the vehicle was taken to the dealer where it was diagnosed with transmission failure. The contact was informed that the transmission pump had failed, and the transmission needed to be replaced. The manufacturer was notified of the failure, and informed the contact that the VIN was not under recall. The contact related the failure to NHTSA Campaign Number: 16V461000 (Power Train). The approximate failure mileage was 120,000.

The contact owns a 2016 Chrysler Town & Country. The contact stated while driving at an undisclosed speed, the engine seized. There were no warning lights illuminated. The vehicle was restarted after several attempts; however, the failure reoccurred. The vehicle was towed to an independent mechanic where it was diagnosed with transmission pump module failure. The contact was informed that the transmission pump needed to be replaced. The vehicle was not repaired. In addition, the contact stated the failure had occurred with an infant child inside the vehicle. The manufacturer was not made aware of the failure. The failure mileage was approximately 116,000.

The transmission studders and temporarily loss of power. Chrysler is aware of issue but will not do anything until nhtsa makes a recall. This is our family of 5 primary vehicle, and we are afraid of this issues causing an accident that can cause harm if not death. I thought the S44 recall would cover the vehicle but it's not listed.

1st Vehicle was driving heavy so I got it checked and the transmission had to be replaced, this was in July?? 2024. The vehicle was still driving heavy 2nd was the traction light(s) VSR?? light turned on 3rd The check engine light came on and gave a P0420 Code. The right catalytic converter was replaced in March 2025 4th The same day I went to repare the Catalytic Converter (before replacement), the Blind Spot System warning came on along with 1. My windshield wipers turning on and off by themselves, 2. rpm went down to 0, 3. the low fuel sign came on even though I just fueled up AND the needle dropped to E, 4. the MPH also went down to 0, 5. the tire detection came on + the light, 6. the ABS light came on, 7. the traction lights came, 8. Heating/A/C system dropped to a lower pressure and then regained pressure, 9. there is a skip when accelerating, 10. won't properly read mileages used11. I lose control of my turn signals, lights, wipers AND hazard light as well as the powered windows Everything turned off and I gained control again Then it started again I turned the vehicle off but the lights kept turning on and off and I kept gaining control then losing it ALL of this occurs while I am driving, at a stop, or just turning on the vehicle Yes this possesses an issue for my and the safety of others No and Yes about the confirmed issues with a certified dealership No because I am scheduled for an appointment with a Chrysler dealer tomorrow (Mar.20th,2025) Yes because I have gone to other dealers and they cannot figure out what the main issue is No the issue has not been inspected by the manufacturer, police, insurance rep., etc. Yes and No to other warnings I knew someone was off because when I turn the key to the run position right before I turn the vehicle on, the check engine light stays on If I leave it in that position until all the other lights turn off, the check engine light remains on When I turn the vehicle completely on, the check engine light disappears

The contact owns a 2016 Chrysler Town & Country. The contact stated while driving 30 MPH or more, the transmission jerked before shifting gear. Additionally, while driving 35 - 40 MPH, there was a grinding metal sound coming from underneath the vehicle. While driving 30 MPH, the vehicle vibrated abnormally, without warning. The contact stated that the failure was intermittent. There were no warning lights illuminated. The vehicle was taken to the dealer who diagnosed the vehicle with transmission failure. The contact was informed that the transmission needed to be replaced. The dealer confirmed that the VIN was not included in NHTSA Campaign Number: 16V461000 (Power Train). The vehicle was not repaired. The manufacturer was informed of the failure. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 198,000.

Transmission failed while driving in the highway. There’s a recall S44 but my vin is not included in the list while my car has the same symptoms that the cars included in that recall.

Sudden transmission failure while driving caused loss of power while in active traffic. Engine code P076A.

Purchased vehicle in March 2024 then in late august 2024 the engine light came on. On October 3rd i took the vehicle to a Chrylser dealer near me and they diagnosed it as needing a TRANSMISSION & OIL COOLER REPLACEMENT, #5 FUEL INJECTOR, and VACUUM HARNESS among other things.

The contact owns a 2016 Chrysler Town and Country. The contact stated while driving 65 MPH, the check engine warning light illuminated and there was a misfire in the engine. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The VIN was not included in NHTSA Campaign Number: 16V461000 (POWER TRAIN). The contact related the failure to the recall. The manufacturer was not notified of the failure. The failure mileage was 176,212.

Unknown nature of causing transmission to surgeon RPMs before going into overdrive. Has caused the vehicle to go into limp or loss of power mode. Would be very dangerous if it happened on a interstate or very busy highway. Could cause a wreck or death

The contact owns a 2016 Chrysler Town and Country. The contact stated that while at a complete stop, the vehicle failed to accelerate upon depression of the accelerator pedal. The contact was forced to place the gear selector into either park(P) or neutral(N), and restarted the vehicle, and the vehicle resumed normal operation after being restarted. The contact stated that on one occasion, the check engine warning light illuminated. The vehicle was taken to an independent mechanic, and the contact was informed that there was a sensor inside the transmission that was defective, and that the transmission needed to be replaced. The mechanic informed the contact of NHTSA Campaign Number: 16V461000 (Power Train); however, the vehicle was not included in the recall. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not repaired. The approximate failure mileage was 160,000.