2019 Honda Odyssey Lighting Problems

The impact on the car is we no longer have cruse control (basic feature) and every time we turn on the car we see many warning lights turn on. Some other feature that does not work is lane assist does not work. According to what shows up to on the dashboard there are problems for "road departure mitigation system Problem", "Auto high-beam problem", "Adaptive cruse control problem", "Lane keeping assist problem", "collision mitigation system problem", "break system", "left sliding door problem" A quick search on the web indicate this a common issue with Honda car (including Acura). [XXX] Another problem we're seeing is driver Side sliding door does not close correctly or open correctly. We have since stop using this door since it's very dangerous for our kids since while opening, it would not open all the way and close on the kids. similar issues [XXX] These two things are broken under 65000 miles and less than 6 years owning the car. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I have a 2019 Odyssey Elite and the following lights come on: Adaptive cruise control problem (ACC); Auto high-beam problem (A); Road departure mitigation system problem; collision mitigation system problem; lane keeping assist problem (LKAS); brake system lights. My problem is intermittent. I can make it go away most of the time by pouring water over the camera or spraying it from the windshield wipers fluid, then turning the car off and back on. That works sometimes. This makes me think it may be due to heat as the windshield (especially the black web lines around the camera) gets very hot. I also have noticed that at night or in cooler parts of the day the lights do not come on most of the time (have not kept a log of problem yet). One problem could be heat but cooling off with water does not always work. In that case, I lightly tap the camera case with a small rubber hammer (it is locate in front of my rear view mirror), turn the car off and back on, and the lights go out. Water plus tapping works and sometimes tapping alone works. This makes me theorize that the weather (heat in my case but I have seen other say it is cold due to snow) causes the cable/wiring within the camera to loosen (meaning weather [heat or cold] sensitive) cable connectors. Thus cooling with water and or light tapping fixes the problem until the next episode occurs. Who knows it could even be the windshield glass. As I said earlier, there is a black webbing type glass etching around the camera. Some say it is the battery, but I have yet to see a post where changing the battery fixed the problem. When the lights are off, all safety features (mitigation, adaptive cruise control, cruise control) work. I assume auto high beam and brakes system will work also. Forgot to add that when I turn the car off and back on, I have to press enter on the steering wheel a couple of times before the lights go off.