NHTSA Investigation
DP15001
Loss of power steering while driving
Key Takeaways
- Investigation DP15001 currently maps to 4 tracked vehicle-year pages across 1 make.
- This page summarizes the public investigation subject, status, timing, and affected tracked vehicles linked from NHTSA source data.
- The linked component on this record is steering:electric power assist system.
What This Investigation Page Shows
This page summarizes a public NHTSA investigation record tied to one or more tracked vehicle-year pages in our database. Investigation records sit between owner complaints and recall campaigns: they can remain open, close without a recall, or connect to a later remedy action. Use this page to see which tracked vehicles are linked to the record, then open the individual vehicle pages for complaints, recalls, and crash test context.
Investigation Summary
On May 27, 2014, amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist while driving in approximately 746,067 model year (MY) 2008 through 2011 Ford Escape vehicles equipped with electric power assisted steering (NHTSA 14V-284, Ford 14S05). Ford's DIR described the defect condition as a poor signal to noise ratio [SNR] in the torque sensor within the Electric Power Assisted Steering (EPAS) system [which] does not allow the PSCM to determine the driver's steering input. When the system detects this fault condition, it transitions the EPAS system to the fail-safe/manual steering mode.Ford's DIR indicates that loss of power steering assist while driving would require higher steering effort at lower vehicle speeds, which may result in an increased risk of a crash.Ford's remedy instructs dealers to check the Power Steering Control Module (PSCM) for Diagnostic Trouble Codes (DTCs) to determine the proper repair procedure. If no DTCs are present, dealers are to update the PSCM and instrument cluster module software. The updated PSCM software changes the torque sensor fault strategy so that the SNR condition does not result in a loss of power steering assist while driving.In addition, audible and visual warnings are provided for torque sensor faults.If DTCs indicating faults in the torque sensor, PSCM or Power Steering Motor (motor) are present in the initial recall inspection, the dealer performs the following repairs: 1) replaces the torque sensor for torque sensor faults (DTC B2278); or 2) replaces the steering column for faults related to the PSCM (DTC B1342) or motor (DTC B2277).Continued in attachment pages
Manufacturer listed on the source record: Ford Motor Company
Component listed on the source record: STEERING:ELECTRIC POWER ASSIST SYSTEM
Affected Vehicles (4)
Browse Affected Vehicles
Affected Models
All data is sourced from NHTSA public records. This site is not affiliated with, endorsed by, or operated by the National Highway Traffic Safety Administration or any government agency. Complaints are unverified consumer reports submitted to NHTSA and may not reflect confirmed defects. For official information, visit nhtsa.gov.
Data synced from NHTSA on May 4, 2026