2017 Jeep Grand Cherokee

The contact owns a 2017 Jeep Grand Cherokee. The contact stated that while attempting to shift into park(P) to exit the vehicle, the vehicle started moving backwards down the slanted driveway. The contact depressed the brake pedal, and the vehicle stopped. The contact then started the vehicle and shifted into park(P). The vehicle was not diagnosed or repaired. On another occasion, while driving at an undisclosed speed or while the vehicle was stopped, the vehicle hesitated and jerked while shifting from a lower to a higher gear. The vehicle was not diagnosed or repaired. The contact associated the failure with NHTSA Campaign Number: 25V011000 (Power Train). The manufacturer was notified of the failure. The failure mileage was approximately 76,000.

THIS MODEL VEHICLE AND SEVERAL OTHERS THAT I HAVE EXPERIENCED, HAVE A CENTER CONSOLE CUPHOLDER THAT IS TRIMMED IN CHROME. THE CHROME IS PEELING ON BOTH CUPHOLDERS AT THE EDGES AND EXTREMELY SHARP AND HAVE PERSONALLY BEEN CUT AND CAUSING LACERATIONS AND BLEEDING.

Vehicle head gasket blown. Stated by mechanic that this is a chronic problem with model due to cylinder head warming and gasket failure. Shortly after repaired the left rear Factory OEM rocker arm broke and damaged one of the overhead cams. Again stated by mechanic that this is a common problem due to known oiling problems with this model. Repaired once again. Vehicle drove less than 500 miles before complete engine failure. Also stated by mechanic as well as multiple online forums that Jeep stoped recalls for these problems because they had become to widespread. They were only willing to repair if the vehicle was still within factory warranty.

The Hood Ajar message stays on and then the service auto start/stop unavailable message comes on. Hood is actually closed and this warning is incorrect but will have to stop car to try and reset it. Hood latch was replaced. First time did not fix it. Took it back and dealership did something else to fix.

It was cold out and my sister was driving my car with the heated seats on when she started to smell fire as well as her back got really hot. She pulled over and leaned forward and discovered a flame/fire coming through the seat back. She burned my hand and had visible ash on it trying to put the fire out. There is now a hole in the seat back from where the fire burned through.

The contact owns a 2017 Jeep Grand Cherokee. The contact stated that while the vehicle was parked and turned off, the vehicle became inoperable. The contact stated that the vehicle failed to start, with the check engine warning light illuminated. The vehicle was towed to a dealer, where it was diagnosed and determined that the fuel pump module and valve had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 188,000.

On January 3, 2026, I test drove a 2017 Jeep Grand Cherokee (VIN [XXX] ) from a franchised Jeep dealership in Lewiston, Idaho. After the test drive, the vehicle was placed on a lift and it was discovered that the front driver-side lower ball joint was missing a retaining bolt, allowing separation from the lower control arm. This condition created an immediate risk of suspension failure and loss of control while driving on public roads. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2017 Jeep Grand Cherokee. The contact stated that while driving at approximately 15 MPH, the vehicle made an abnormal sound and was stuck in first gear. The transmission warning light was illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed, and determined that an unknown internal transmission part needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 74,000.

The contact owns 2017 Jeep Grand Cherokee. The contact stated while driving 25 MPH, the check engine warning light was illuminated. The vehicle was taken to an independent mechanic, where the contact was informed to take the vehicle to the dealer. The vehicle was then taken to Firestone, where the contact was informed that there was no recall associated with the VIN. The contact related the failure to NHTSA Campaign Number: 23V411000(Engine and Engine Cooling); however, the VIN was not included in the recall. The manufacturer was not notified of the failure. The failure mileage was 81,767.

I used my cruise control on the highway and once I turned it off my Jeep began vibrating a lot. My Jeep now vibrates all of the time when I accelerate. I took it to the shop and had over $2,200 in work done and they are unable to find the specific reason that it is vibrating when I accelerate and stated it likely to due to something with the transfer case. After hours of non stop research I discovered that the issue that I am having is exactly like the Stellantis 01C issue but I am not finding my Jeep under the recall list. I also had an issue where my oil cooler housing unit was cracked and had to be replaced because it is made out of plastic.

Active head restraint deployed unexpectedly while driving at very slow speed. In addition to the immediate shock, it hit the back of my head and neck very hard. Still experiencing neck pain.

My 2017 Jeep Cherokee rolled away three times in one day while in Park with the Electric Parking Brake engaged. My driveway has no flat area and slopes toward a public road, creating a serious hazard for my family and traffic. The rollaways occurred suddenly with no warning lights. I had to park the Jeep sideways in a snowbank for two weeks to prevent further rollaways, creating added risks for my family in winter conditions. The vehicle remains at the dealership. During the first two days of the evaluation, the dealer confirmed brake shoe thickness (4mm), verified the EPB software was current, and found no diagnostic codes. They could not recreate the rollaway or identify a cause. No mechanical or electronic faults were found. FCA communication has been inconsistent. I experienced dropped calls, long holds, contradictory statements, and repeated refusals to provide written documentation of the inspection authorization. FCA said they could not escalate the safety case unless the vehicle was already at the dealership, yet still refused written confirmation of the purpose of the inspection, and I was not willing to bring the vehicle in without documentation. After the evaluation, when I attempted to relay the required findings per the RO instructions, FCA informed me the safety case had already been closed, leaving no record of the defect. FCA said only the rental authorization remained open and they could no longer escalate my case. I then had to re-explain the entire rollaway incident. FCA and the dealer now disagree on whether the RO is open or closed, and FCA has not explained who is responsible for the ongoing loaner or what the next steps are. The defect remains unresolved and the Jeep is unsafe to operate or park at my home.

The contact owns a 2017 Jeep Grand Cherokee. The contact stated that while accelerating from a complete stop at a stop sign at approximately 5 MPH, the contact heard an abnormally loud banging sound followed by an abnormal grinding sound coming from underneath the vehicle, near the driver's feet. The vehicle then shifted to neutral and failed to move. The contact was able to turn off the vehicle after disconnecting the ECM. The contact was able to push the vehicle to the side of the road with assistance, and the vehicle was left on the side of the road overnight. The vehicle was towed to a certified mechanic, where it was diagnosed that the sheer pins and the power transfer unit (PTU) connection had failed. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 25V011000 (Power Train). The dealer was contacted and confirmed that the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 150,000.

Car lost power while driving. Related to recall notice received Feb 2025 with no update still. recall 01C related to PTU power transfer unit. Recall is past due solution and available parts from Chrysler and POSES A MAJOR SAFETY ISSUE!

We were in an accident with heavy front end and right corner panel damage and none of my airbags deployed.

Defect in transmission causing a total replacement to be needed. Jeep is aware of issue and is changing the way they’re built but not recalling.

While driving, my car stopped and on the dashboard was a message that said shift to p. This happened 2x in a week.

Driver's side head restraint exploded as I was pulling out of my driveway with no advance warning. Thankfully I was facing forward when it deployed, or it would have slammed into the back of my head. I found my extended warranty notice from FCA regarding this issue. Contacted my dealership and scheduled an appointment for repair/replacement on 11/1.

The contact owns a 2017 Jeep Grand Cherokee. The contact stated that while driving out of the driveway, the transmission unexpectedly shifted into neutral. The shift to park message was displayed on the screen. The shifter became stuck and failed to shift to park(P). The vehicle was restarted. While driving 55 MPH, the message “Shift to Park" was displayed. The "Vehicle was at too high a Speed" message was displayed. The vehicle failed to shift into park. The vehicle failed to move. The drive warning light was flashing, accompanied by an abnormal dinging sound. Upon further research, the contact was able to link the failure to NHTSA Campaign Number: 25V011000 (Power Train). The contact called the local dealer, who confirmed that the VIN was not under recall. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 180,000.

I was taking my daughter to school and we were stopped at a light when the check engine light came on. When the light turned green and I pressed the gas the vehicle didn’t seem to respond at all and I rolled my car at the right turn and parked it. I turned it off and back on and it was still doing the same thing. I had someone pick up my daughter and take her to school. I started scheduling a tow but after it sat for a while it was able to drive to a shop for inspection where they tested it and received the error code: P076F = Gear 7 incorrect ratio. I was told the entire engine needs to be replaced. The vehicle has low mileage. Our safety was at risk because I had no warning to get the car to the shop before a major malfunction. I was very fortunate my car was stopped at the time. If I was waiting at a left turn in an intersection we could have had a terrible collision. The exact problem has not been reproduced. The vehicle has not yet been inspected by the manufacturer.