2018 BMW X3

While driving on the interstate lost coolant through the oil cooler housing. I had to quickly get to the shoulder of the road having to cross several lanes of traffic. The car had to be towed. I had it towed to the dealership where I purchased it as I paid for an extended warranty. Warranty company denied the claim. Through research I am finding this is an issue with BMWs as they part is plastic and does not stand up well with the temperature changes it is subjected to. This needs to be a recall. The car is still in the shop, 45 days later. Approximate cost to repair $2,840.00 plus tax.

Vehicle lost coolant and warned me to pull over because of the engine overheating. Later was diagnosed with a leaking oil filter housing. Simply too early for such a component to fail. Left my wife stranded miles away from home in the snow.

BMW installed a part that is failing quite a number of vehicles including this vehicle. The oil filter housing was not properly constructed at the factory. Fails.

Oil pump failure due to plastic brittle materials failing prematurely. It is a common problem that is well documented across the owners that have this vehicle.

This problem has occurred to me now twice. Both occurrences were on very cold days where the temperature was below 20 degrees F. The car starts promptly and runs, but the entire dashboard electronic instrument cluster is non-functioning and dark . In this condition, you cannot tell your speed, engine rpm, fuel level, engine temperature, or any mileage numbers. The turn signals also do not work. The headlights and the iDrive screen and the climate control were all lit properly and functioned. I did not think to check the brake or tailights, unfortunately. Multiple restarts of the car had no effect, and so I drove home without the dash functions. After the car sat overnight in my garage (which is somewhat warmer) the dash lights returned to their proper function.

The Front Passenger Seat Occupancy Sensor Mat (CIS) in my 2018 BMW X3 failed at 56,000 miles. This failure is confirmed by the specific BMW fault code 930A1C (Seat Occupancy Detector Malfunction) stored in the Advanced Crash Safety Module (ACSM). The component is currently installed in the vehicle and available for inspection. This defect poses a severe safety risk: the system fails to consistently detect a seated front passenger. As a result, the passenger airbag may be disabled and fail to deploy in a collision, significantly increasing the risk of injury or death. The dashboard displays a "Passenger Restraint System" malfunction warning, accompanied by an airbag light and chime. The issue is intermittent and load-dependent. It triggers specifically when an adult passenger occupies the seat for extended periods (e.g., highway driving), indicating a physical fatigue failure of the sensor mat grid under compression. I diagnosed the fault using BMW factory-level diagnostics. However, both the local BMW dealership and BMW North America have refused to cover the diagnosis or repair under the existing warranty extension (SIB 72 01 25) for this exact component, stating my specific VIN is excluded despite the vehicle exhibiting the known safety defect.

A BMW dealership has indicated that the motor mounts on my vehicle need to be replaced. My vehicle has under 29,000 miles, and these parts are designed to last for 60,000 to 100,000 miles. A premature collapse of the motor mounts indicates a manufacturing defect, material weakness or installation error from the factory. I understand that this defect is common for 2018-2020 X3 models. The vehicle did not display any symptoms of this defect and no indicators were displayed on the on-screen monitor.

The contact owns a 2018 BMW X3. The contact stated that while driving over 45 MPH, the Lane Departure and Blind Spot features deactivated unintendedly. The message that the system was deactivated was displayed. The local dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 71,000.

Coolant leak. Oil filter housing coolant leak. Water pump leak. Coolant leaked while driving, and vehicle was not driveable after arriving at the dealership when all the coolant purged out of the vehicle.

Drivers left front daytime running lights failed after <4 years from warranty replacement. 3rd set of lights in under 7 years on this vehicle.

PCV valve issues. Failing PCV valve. I bought my car in 2020 certified pre owned and having issues wi the the PCV Valve similar to the recall for 2018 BMW x3 M40.

Light indicator showed low coolant levels. Car was leaking coolant slowly. Filled up coolant but levels continued to go down. Brought to mechanic and they had to remove oil filter housing to replace failing gasket. Car is about 113K miles.

The contact owns a 2018 BMW X3. The contact stated that while driving at an undisclosed speed, the seat belt warning light illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 55,000.

The windshield was replaced due to a crack from road debris. It was replaced with a Fuyoa 43R-0117043; DOT1038M544AS1. The car has head up display. The new windshield is highly reflective when driving during sunny day, and the head up display equipment is reflecting on the windshield in the middle of driver's view and very distracting. The previous windshield had a minimal reflection of head up display during daytime sun but not a driver distraction. BMW service (installed the windshield with OEM part) rep drove the car and observed the strong reflection. The service rep checked with BMW engineers who reported this is an issue they are receiving more reports about but the rep said there is nothing BMW will do in response to this safety complaint. He indicated the windshield is OEM and to specifications. There are no warning lamps or messages related to the new windshield, only this driver's observation of negative change in view while driving. The reflection does not occur when the car is in the shade.

Vehicle: 2018 BMW X3 VIN: [XXX] My 2018 BMW X3 has had continuous oil and coolant leaks for several years. Major parts have already been replaced including the turbocharger, oil cooler, water pump, turbo lines, radiator hose, thermostat, and valve cover gaskets. The dealer recently confirmed my crankshaft seals are leaking. These issues are consistent with a defective Positive Crankcase Ventilation (PCV) system, which causes excess crankcase pressure and oil leaks. BMW issued an Extended Limited Warranty for PCV/valve cover defects on other models but said my VIN isn’t included—even though I’m experiencing the same failure pattern. This creates potential fire and safety hazards from oil leaking onto hot engine components, as well as the risk of sudden engine failure and environmental hazards from oil dripping onto roads. I respectfully request that NHTSA investigate whether 2018 BMW X3 vehicles should be included in BMW’s PCV/valve cover recall or extended warranty coverage. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

BMW uses plastic coolant pipes which become brittle and crack causing huge issue with entire coolant system. It’s a known issue for bmw repair facilities including engine failure

Around April 2025, While driving at highway speeds for approximately 1hour with cruise control engaged, vehicle suddenly began to decelerate as if I had taken my foot off the throttle. Pressing the throttle had no effect on engine RPM or vehicle speed as the vehicle continued to decelerate. Tapping the brakes then pressing the throttle had no effect as vehicle continued to decelerate. I was able to negotiate across lanes of highway traffic at low speed to reach shoulder with no throttle control. After coming to a stop on the highway shoulder, pressing the throttle failed to rev the engine or move the vehicle forward in drive. After placing transmission in reverse, the vehicle did back up normally allowing me to put the car in a safer position on the shoulder. After turning off the ignition and restarting, the vehicle operated normally. I was able to complete my trip without incident. I did not engage the cruise control. A few days later, I took the vehicle to an BMW dealer service center but no error codes or malfunctions were identified. A second incident similar to the first occurred in August 2025. Again, I was able to reach the shoulder without serious incident. After turning off the ignition and restarting, the vehicle operated normally. I was able to complete my trip. I did not engage the cruise control.

Passenger Seat Occupancy mat in the seat failed which disabled the passenger airbags. So it is very unsafe to drive the car now. This problem applies to many other BMW cars for which the warranty was extended. Unfortunately my car is not included in the warranty extension and out of pocket cost to repair it is $2500. I can’t afford to fix it. I believe that many other owners experience the same problem leading them to drive unsafe cars or disabling the system using aftermarket solutions. I truly believe that for the safety reasons BMW should extend the warranty for the model of my car.

I cannot take the vehicle to the dealership to have the recall performed. I have spoken with the closest dealership and they will not provide a driver or towing services unless I pay for it. The letter I received from BMW indicates if my "BMW center is unable to remedy the defect without charge or a reasonable period of time", I should notify the NHTSA. Unless BMW follows federal guidelines, I cannot have the recall remedied. I would like some options or relief so that the recall can be performed.

When the temperature is cold, the instrument cluster won’t turn on.