2023 GMC Yukon

My engine has metal flake in it and once which is a sign of engine failure. I reported it to GM they said it was a normal amount and to keep an eye on it the next day toil change. They issued a recall on the 6.2L motors and they have not on the 5.3L motors and this one is doing the same thing. I want to get ahead of the ball before my engine give out on the highway but GM is treating it like it’s not a big deal.

Months ago I took my car to the dealer for the engine failure recall and they said there were no issues and changed the oil to a higher viscosity oil. Today I was driving and my engine failed while turning onto a busy road and took multiple tries to get started. It finally started and the engine light was flashing. The dealer told me th flashing engine light was bad and to not drive at all. I pulled over and had it towed to the dealer. The engine light stopped flashing. The dealer said they pulled a code on the computer and would look at it. They had my car for a full day so far and have said they can't find an issue. I do not feel safe having my family in this car when the engine can fail and they say nothing is wrong. I am lucky that I wasn't hit at the location it failed at.

Loss of propulsion due to engine failure after recall repair completed.

Was driving approximately 70 miles per hour on the highway. While driving the vehicle just stopped in the middle of the highway after going 70 miles per hour. Was unable to put car in park. Car just shut off. Four police cars had to surround car due to being stuck in the middle of the highway with my small child in the car. Took an hour to get a tow truck. Being told our engine is now completely shot.

The 6.2L motor in my GMC Yukon failed due to the camshaft and stalled me in an intersection on a highway. Had to shut the lanes down to get towed. Lost all power and couldn’t do anything but sit in the road. Just did a PICO test and it “passed” but failed 3k miles after the recall was done.

The brake system control module, engine control module, and vehicle stability control system have repeatedly failed across 24 months and 9 repair attempts at two authorized GMC dealerships in Tennessee. As of March 17, 2026 the vehicle has 27 active diagnostic fault codes including U160F and U1610 (brake system control module lost communication on both CAN buses), U1611 (engine control module lost communication), and C2A0A (vehicle stability control disabling inhibited). All components are available for inspection at Beaman GMC in Antioch, Tennessee where the vehicle currently remains in an undrivable condition. Safety risk: Vehicle has stalled on the highway with my family including young children in the car. Brakes have randomly engaged over 100 times with nothing around and also failed to engage when needed. Stability control is disabled. These are active safety failures confirmed by GMC's own diagnostic scans. The problems have been confirmed by both Darrell Waltrip GMC and Beaman GMC across 9 visits. GMC's own Technical Assistance Center (Case XXX) was involved and could not resolve the defects. The vehicle was returned with more active codes than at drop-off after 57 consecutive days in GMC custody. Two unresolved GMC safety recalls are open on this vehicle — L87 engine loss of propulsion (N252494003) and brake fluid leak detection failure — directly related to the reported defects. Warning codes have been present and documented since October 2023 beginning at 1,381 miles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

What component or system failed or malfunctioned, and is it available for inspection upon request? The vehicle experienced a malfunction associated with a failed Over-The-Air (OTA) software update affecting electronic control modules. The (ECM), (BCM), and related electronic systems appeared to lose stability during operation. The vehicle attempted to reboot while being driven and displayed multiple system warnings. The vehicle is currently at the dealership and is available for inspection upon request. How was your safety or the safety of others put at risk?While driving, the vehicle began malfunctioning and attempting system reboots. The dashboard flickered, warning lights, and the vehicle exhibited unstable behavior. During a prior event, the vehicle experienced unintended acceleration and abrupt deceleration. This created a risk of loss of vehicle control, particularly in traffic. I have small children in this vehicle, and the unpredictable electronic behavior while in motion posed a significant safety concern. Has the problem been reproduced or confirmed by a dealer or independent service center? The dealership confirmed that a previous event was caused by a failed OTA software update. The vehicle has since malfunctioned again while driving and has been taken back to the dealership for further inspection. The dealership has acknowledged module instability and opened a TAK case with the manufacturer. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? The vehicle has been inspected by GMC1 dealership. A case has been opened with GM Customer Care. No police or insurance reports. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? 9 days prior to the first major malfunction, the check engine light illuminate. On April 1, the check engine light re-appeared and the vehicle attempted to reboot again while driving.

I just survived a terrifying incident that proves the current GM 6.2L (L87) engine "recall fix" is a dangerous myth. Living with the "Ticking Time Bomb" I bought my 2023 GMC Yukon AT4 brand new, but for the last two years, I haven't truly "owned" it—it has owned me. Every long-distance trip with my family was filled with anxiety. I constantly worried that I’d be the next one stranded on the side of the road while my neighbors' and friends' 6.2L engines were seizing all around me. I traveled with fear that I’d be coming home in a rental car. The False Security of the Recall When the recall finally arrived, I thought the nightmare was over. On Sept 15, 2025, my dealer in Newburgh, NY, inspected the truck at 48,000 miles. They told me my engine "passed," switched the oil to 0W-40, and issued me a 150,000-mile extended warranty. I realized then what I know for sure now: 0W-40 oil is a band-aid, not a cure. GM used thicker oil to "cushion" a physical manufacturing defect in the crankshaft and bearings just to avoid the multi-billion dollar cost of engine replacements. They traded my family’s safety for their bottom line. The Catastrophic Failure Last Friday, March 13, 2026, the "fix" failed. I was traveling 70 mph uphill on I-84 with my **newborn baby** and two other kids in the back. Without warning, the engine seized solid. I lost all propulsion in heavy traffic and had to fight to get my children to the shoulder. We sat in the freezing cold for over an hour while traffic flew by us. An extended warranty is worthless when your engine dies in a high-speed traffic lane with an infant in the car.

My 2023 GMC Yukon Denali with the 6.2L V8 suffered a sudden loss of propulsion while traveling at approximately 70–75 mph on the highway with my wife and young daughter in the vehicle. The engine RPM dropped immediately to zero and the vehicle displayed a message instructing me to press start. I do not recall any meaningful prior warning lamps or symptoms before the failure. I did not hear a loud bang or other dramatic engine noise; the vehicle simply lost power and would not continue driving under engine power. I had to coast across lanes/shoulder to a stop, which created a serious safety risk to my family and other drivers because the vehicle lost propulsion at freeway speed without warning. After stopping, the vehicle would not restart. Pressing the start button produced only a click from under the hood and the engine would not crank. The vehicle was towed to a GMC dealership in Victorville, California. The dealer has since confirmed that the engine requires full replacement. The failure has therefore been confirmed by an authorized GMC dealer and the vehicle should be available for inspection through that dealership/manufacturer if requested. This is especially concerning because this vehicle was already part of the known GM 6.2L recall population and had supposedly passed the recall inspection/remedy before I purchased it. Despite that, the engine still failed catastrophically only about 1,355 miles into my ownership. Purchase mileage was approximately 26,343 and failure occurred at approximately 27,698 miles. Based on what the dealer told me, the failed component/system is the engine assembly.

On September 4, 2025, I brought my 2023 GMC Yukon Denali in for the product safety recall regarding the engine. My engine passed the recall inspection and I was given an oil change with high grade synthetic oil. This past Saturday, March 7, 2026 as I was driving in Tampa Florida with my [XXX] son, my Yukon experienced catastrophic engine failure and I lost all propulsion control. The car went into neutral and I pulled along the side of the road safely to avoid an accident. As I put my car into park, the engine shut off completely and would not turn on again. There was no clicking sound and no attempting to turn over. I contacted roadside assistance and they sent a towing company to bring my Yukon to Century Buick GMC in Tampa Florida. The symptoms of what happened are similar to those of the recall. The dealership is replacing the engine however this is a critical safety issue as my son and I could have been severely hurt and or killed. Please investigate. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

On 3/3/2026 during the night-time hours, I was traveling on the freeway in my 2023 GMC Yukon at over 65 MPH when I received a notice from the instrument cluster stating that the battery was low and oil pressure was low. Before I could pull over to a safe location, the Yukon turned off while in motion. My wife and two children were in the vehicle. The Yukon stalled in the number one lane of the off-ramp. I had to remove my children and wife from the vehicle while in the roadway on busy throughfares and in darkness. I attempted to jumpstart the Yukon, but efforts were unsuccessful. The Yukon was towed to the dealership where I purchased it purchased from. The Yukon was returned to my custody on 3/10/2026 stating it was an issue with the battery. While driving the Yukon home it began to bog down and stalled out in-front of my residence as it was being driven by my wife. After arriving home (night-time), I went to check the Yukon, and it started with no issues. I drove the Yukon to see if the errors would occur again. While driving the Yukon on the freeway, the Yukon RMPs indicated close to redline and I received a notification from the instrument cluster stating to turn the vehicle off (traveling at about 70-75 MPH). Once again, I was unable to pull off to a safe location before the Yukon turned off on its own while still in motion; I attempted to jumpstart the Yukon but attempts were unsuccessful. The Yukon was towed again to dealership. On 3/11/2026 I was advised that the engine had seized and on 3/13/2026 I was advised by GMC the engine needed to be replaced (this was covered under powertrain warranty). The approximate milage of the vehicle is at about 42,200.

Recall Notice for Engine - Recall Service done 12/7/2025 - completed Full Engine Failure 12/22/2025 after recall service completed - Engine Replaced and returned to us on 1/15/2026 2/20/2026 - Service Engine Light with same warning code now on Yukon with new Engine - appears as if new engine has failed

Please see attachment

The engine failed and had to be replaced with less than 70,000 miles on it. There has already been a recall associated with these vehicles where a part is either replaced or special oil has to be used. It does not seem that the fix prevents the engine from failing.

My 2023 Yukon AT4 was taken to certified GMC dealer in November 2025 for the engine recall. The dealership gave my vehicle a clean bill of health at that time and the recall repair was cleared. On Friday, 2/13/26, myself and 5 other family members were en route to my godfather's veteran funeral service in Newtown, PA. We were going 75mph in the middle lane of the PA Turnpike when the motor seized up and vehicle lost all steering control and power. Since it was the side of the turnpike, we were limited in resources and stranded, missing the funeral service due to the length of time it took to get the vehicle loaded on a tow truck. Since the vehicle was unable to release the parking brake, the tow driver(s) were struggling to tow it. My husband, ended up having to go under the vehicle (on the side of the turnpike) to disengage the parking brake to help the tow drivers. This could have been a catastrophic situation. My vehicle was taken to a different GMC dealer than the original one that did the recall check. There are no rental vehicles available, so I am too out of a vehicle necessary for my work and family, with no time frame on the repair of my engine that only has 31,000 miles on it.  

My 2023 Yukon Denali is part of the L87 engine loss of propulsion recall. On August 28, 2025 my Yukon was inspected by Sterling McCall Buick GMC (where I purchased it) and it was deemed to have passed inspection. They changed the oil and installed a new oil fill cap and filter. On February 13, 2026 I took my Yukon to my mechanic for an oil change. Upon initiation, he advised me that he found the oil stick to be dry, no oil on the stick. There was no leak.

Post initial remedy, which included oil sand cap replacement to 0-40, as directed by the manufacturer's recall documents, and passing the PicoScope test on August 26, 2025, the vehicle lost propulsion while traveling 58 mph, in the center lane of a busy, notoriously dangerous Saeford-Oyster Bay highway. At the time, the vehicle was occupied by a 2-week-old infant, the child's mother, and a dog. Prior to the failure, there were no indications of a pending or present issue. The vehicle's engine shut off, it shifted into neutral, and upon stopping, it shifted into a parked position, where it remains to date. Subsequent to pulling the vehicle onto the shoulder, the engine failed to restart. Approximately 6 hours later, the vehicle was towed to a GMC dealer, which subsequently confirmed that the engine is seized. The dealer submitted a report to GM to remedy the condition, pursuant to the manufacturer's recall instructions, but the manufacturer is yet to approve the remedy.

While driving down the road, my 2023 Yukon 6.2L engine shut down, shifted to neutral, and a message on the screen said “press start again” leaving my family in a powerless vehicle in the middle of the road in moving traffic. There were no warning signs nor is my vehicle included in a current recall. The vehicle will be taken to the dealership tomorrow morning.

Vehicle developed hesitation. Message: "Reduced Acceleration Drive with Caution" Check Engine light comes on, fortunately near home. Scanner showed "PO 0747 Transmission Valve #1 stuck open." Research shows this is a common problem and a safety issue and can leave driver stranded or worse. Had vehicle "serviced" at selling dealer, but they did not touch the transmission. Said they drove it around the block and it was fine. Image attached. I was then told that parts are not available and GM will not authorize swapping out the valve body. Forums posts show a lot of dissatisfaction with GM over this issue.

Rear camera for in cabin rear view is improperly sealed for cold weather and constantly fogs which renders the camera worthless. I was also sent brand new side lights from gm that were improperly sealed and built condensation them after a month or two.